() 해외배송 가능
판매가 | |
---|---|
소비자가 | 0원 |
적립금 |
|
무이자할부 | |
제조사 | ALIGN |
원산지 | |
상품코드 | P0000GUM |
수량 | |
국내/해외배송 |
ALIGN RC T-Rex550E/600 DFC Main Rotor Head Upgrade Set
T-Rex550E/600E PRO용 플라이바리스 타입 DFC 헤드 컨버젼 세트.
극단적으로 낮은 헤드 포지션, 더욱더 짧아진 메인샤프트 시스템으로 싸이클릭 저항을 최소화, 아울러 더욱더 극단적인 기동성을 확보.
메인 홀더 암의 볼트 재질이 변경된 Revision.2 세트입니다.
주의 : 본 컨버젼 세트는 기존 600 EFL V2 헤드에서 DFC Head로 컨버젼하는 업그레이드 패키지 입니다. 따라서 본 패키지에는 600 메탈 메인로터 홀더와 스워시 및 쓰러스트 베어링, 페더링 샤프트는 포함이 되어 있지 않으며, 현재 사용하고 계시는 헤드의 파트를 유용하여 업그레이드 하시면 됩니다.
주의 2 : 본 DFC 헤드 컨버젼은 600E Pro 및 550E 전용으로서 600Nitro에는 사용이 불가능합니다.(600 Nitro용 DFC System은 추후 발매 예정)
<Test Movie>
1. Special Thanks to Kenny Ko!
<제품 이미지>
Instruction:
●Follow by 700 DFC’s design, the 600 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimaginable flight speed with extremely attractive design.
Features:
●Extreme low CG and short main shaft design, dramatically reduces flight resistance, effectively improves T-Rex 600’s 3D performance and speed.
●Two part detachable main blade grips for ease of maintenance and assembly.
●New style linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that is much simplified and rigid.
●Upgrading to the 600DFC rotor head assembly is extremely easy; just replace the head block included in the 600DFC kit, replace the blade grip pitch lever with the new 600DFC lever, connect the 600DFC linkage assembly, and replace the main shaft with 600DFC main shaft. Existing swashplate and newer main rotor grips are kept in the upgrade.
●Suitable for T-REX 550E /600E PRO flybarless system.
<제품 사양>
●600 DFC Main Rotor Head Assembly(Φ44.45x43x17mm) x 1
●600 Feathering shaft sleeve-black(Φ8xΦ10x31mm) x 2
●600 Damper rubber-black(Φ7.9xΦ13x6.5mm) x 2
●M3 Set screw x 1
●Socket collar screw(M3x19mm) x 1
●600DFC Main Blade Grip Arm x 2
●600DFC Main rotor grip arm integrated control link(Φ9x11x37.2mm) x 2
●Collar(Φ3xΦ4.9x5mm) x 2
●683ZZ Bearing(Φ3xΦ7x3mm) x 4
●700DFC Linkage rod A(M3x14mm) x 2
●700N Elevator ball link x 2
●600DFC Main Shaft(Φ12x163.3mm) x 1
●Socket collar screw(M3x6mm) x 4
●M3 CNC socket collar screw(M3x19mm) x 2
●Washer(Φ3xΦ4.8x0.3mm) x 2